We’ve partnered with Hearth to offer financing that fits your budget so you can move forward without delay.
Anchored Helical Walls
Anchored & Helical Wall Systems in Lakewood
Reinforcing the Walls That Hold It All Together
When your retaining or foundation walls start to lean, bow, or crack, anchored systems provide the support they need to stand strong again. Anchored and helical wall systems are used to stabilize walls that are under excessive lateral pressure from soil, water, or structural loads. These solutions are minimally invasive and highly effective for restoring integrity to failing walls without the need for full reconstruction.
Understanding Anchored and Helical Wall Systems
These systems utilize anchors embedded into the ground to transfer tensile loads and reinforce structural stability:
- Anchored Wall Systems: Use steel tiebacks (or "anchors") that are driven deep into stable soil behind a leaning or bowing wall. These anchors are attached to the wall face and tensioned to counteract the soil pressure.
- Helical Wall Systems: Use screw-like helical anchors (similar to helical piers) that rotate into the ground to provide tension and lateral resistance. They’re ideal for tight spaces, sandy soil, and even new construction reinforcement.
When Are Anchored or Helical Systems Needed?
Walls don’t fail overnight—but these are the signs yours may be headed that way.
- Retaining walls that lean or bulge outward
- Foundation walls are bowing due to hydrostatic pressure
- Horizontal or stair-step cracks across block walls
- Water build-up behind retaining walls
- Failed or missing wall tiebacks in older construction
- Lack of reinforcement in tall or heavily loaded walls
How Anchored & Helical Wall Systems Work
Strength you can’t see—working behind the scenes to stop movement for good.
- Drilling or driving tiebacks or helical anchors through or behind the wall into stable soil
- Connecting the anchor to a steel plate or bracket inside the wall
- Tensioning the anchor to pull the wall back toward its original position
- Securing the system permanently to resist future movement or soil pressure
These systems allow for progressive correction, meaning the wall can gradually be pulled back over time—especially in the case of bowing foundation walls.
Benefits of Anchored & Helical Wall Systems
Addressing timber wall issues requires tailored solutions based on the specific problem and its severity.
- Replacing Damaged Sections
- Removing and replacing rotted or infested timber to restore structural integrity.
- Minimal disruption to landscaping or interior finishes
- Strong, permanent lateral support for walls under pressure
- Can be used in both repair and new construction
- No need to excavate the entire wall or replace it
- Works in various soil types, including sandy or loose fill
- Proven engineering-backed solution with decades of success
Why You Shouldn’t Wait on Wall Stabilization
The longer a wall is allowed to shift or bow, the higher the repair cost.
- Walls that lean more than 2 inches may require total rebuilds
- Foundation movement impacts floors, plumbing, and framing
- Unstable walls can collapse, especially under wet or heavy conditions
- Fast action helps preserve your yard, home value, and safety
Compatible Wall Types for Anchored & Helical Solutions
- Concrete block foundation walls
- Cast-in-place concrete basement walls
- Wood, timber, or crib retaining walls
- Brick/masonry garden walls
- Soil nail wall retrofits or tall gravity walls